AS3992 UHF RFID Reader IC
UHF RFID Single Chip Reader with Dense Reader Mode EPC Class 1 Gen 2 Compatible and Integrated PA
描述
The AS3992 UHF Gen 2 Reader chip is an integrated analog frontend and provides protocol handling for ISO18000-6b/c 900MHz RFID reader systems. Equipped with multiple built-in programming options, the device is suitable for a wide range of UHF RFID applications.
The AS3992 is pin to pin compatible with the previous AS3990/91 IC's. It offers improved receive sensitivity to -86dB, fully programmable Rx DRM filters on chip and pre-distortion. Fully scalable, the AS3992 is ideal for longer range and higher power applications.
Offering DRM compliance on chip, combined with improved sensitivity and pre-distortion allows the AS3992 to be the only true world wide shippable IC. The reader configuration is achieved through setting control registers allowing fine tuning of different reader parameters.
主要特征
- ISO18000-6C (EPC Gen2) full protocol support
- ISO18000-6A,B compatibility in direct mode
- Full DRM compliance on chip allowing a true World Wide Shippable device
- Improved receive sensitivity to -86dBm
- On chip pre-distortion meaning improved external PA efficiency
- Integrated low level transmission coding, Integrated low level decoders
- Integrated data framing, Integrated CRC checking
- Parallel 8-bit or serial 4-pin SPI interface to MCU using 24 bytes FIFO
- Voltage range for communication to MCU between 1.8V and 5.5V
- Selectable clock output for MCU
- Integrated supply voltage regulator (20mA), which can be used to supply MCU and other external circuitry
- Integrated supply voltage regulator for the RF output stage, providing rejection to supply noise
- Internal power amplifier (20dBm) for short range applications
- Modulator using ASK or PR-ASK modulation
- Adjustable ASK modulation index
- AM & PM demodulation ensuring no “communication holes” with automatic I/Q selection
- Built-in reception low-pass and high-pass filters having selectable corner frequencies
- Selectable reception gain, Reception automatic gain control
- AD converter for measuring TX power using external RF power detector
- DA converter for controlling external power amplifier
- Frequency hopping support
- On-board VCO and PLL covering complete RFID frequency range 840MHz to 960MHz
- Oscillator using 20MHz crystal
- Power down, standby and active mode, Can be powered by USB with no need for step conversion
产品应用
- Fixed Readers
- Portals
- Car Access
- Hand held's
- Embeddable
Block diagram for AS3992 UHF RFID Reader IC
AS3992 UHF RFID Reader IC with Dense Reader Mode Block Diagram


