AS3607 Power Management IC
3 Buck DCDCs, 5 LDOs, 1A Linear Charger, General Purpose ADC, Programmable Startup
Description
The fully programmable power management unit AS3607 includes: three DC-DC step-down converters and five low-noise LDOs suitable for RF applications, an LED backlight driver, two programmable current sinks and a powerful Li-Ion battery charger. The three step-down converters deliver 700 mA each with an efficiency of up to 95%, extending battery life significantly. The fixed 2 MHz switching frequency minimizes PCB footprint by allowing the use of tiny, low-profile inductors
Key Features
Voltage Generation
- 3 DCDC step down regulators
- - DVM (0.61V-3.3V, 700mA)
- - 50uA quiescent current
- - selectable switching frequency (2 or 1MHz)
- - 1.4A with combined DCDC 2 & 3
- 1 LDO low noise 2.7V (2.3-3.5V), 100mA
- 3 or 4 LDOs low noise
- - 1.2-3.5V; 150/250mA
- - 30uA quiescent current (low power mode)
- power supply supervision (LDO1)
- 5sec and 10sec emergency shut-down
- hibernation function
HV Backlight Driver
- step up for 26V backlight with internal transistor
- voltage control mode and over-voltage protection
- 2 programmable current sink (max. 38mA)
- max. 20mA@50V (with ext. transistor)
- possible external PWM dimming input
Battery Charger
- prog. trickle charging (25-220mA)
- prog. constant current charging (100-1000mA)
- prog. constant voltage charging (3.9V-4.25V)
- charger time-out and temperature supervision
- selectable current limitation for USB mode
- integrated battery switch & ideal diode
- external battery switch control output
Battery and Temperature
Supervisor2 or 4 General Purpose IOs
- 10bit general purpose ADC input
- PWM dimming input or wake-up input
- status output for: charger, low battery, power good and power-up key
OTP programmable BOOT Sequence
- programmable regulator default voltages
- programmable start-up sequence
- applicable for LDO 2-5 and DCDC 1-3
Control Interface
- I2C control lines, including watchdog
- Power-Up input
- Interrupt output
- bidirectional reset, with selectable delay
- ultra low power standby mode, 110uA with LDO5 on
Power-On Reset CircuitPackaging
- QFN36 6x6mm, 0.5mm pitch
Applications
PDA, PMP, GPS-Navigation System, e-Dictionaries
1 Cell Li+ or 3 Cell NiMH powered devices
Reference designs from processor vendors and partners of austriamicroysystems are available for many processor types.


